Modular Solar Powered Attic Fan

With SNOWVENTCO Smart Filter Attic Vent

iSolar’s 19W-MOD featuring the CSA approved SNOWVENTCO Smart Filter Vent with micropore stainless steel filter technology: hail resistant, over 99% impenetrable barrier to snow, rain, insects and vermin.

iSolar 19W-MOD-SNV

With SNOWVENTCO Smart Filter Attic Vent

SOLAR ATTIC FAN – iSOLAR 19W-MOD-SNV with SNOWVENTCO Smart Vent • 100% Solar Powered • up to 400 CFM • Ideal for a 600 sq. ft. Area • Keeps Attics Cool • Endorsed by HGTV’S BRYAN BAEUMLER • by iSolar Solutions





View Reviews

From

^$314^{00 USD}

A modular roof mount solar attic fan that easily retrofits into existing or new vent covers such as the SNOWVENTCO vent Type B (included). Generally requires two units that can be strategically located on a roof for optimal air-flow. A natural solar energy driven fan, making highly efficient yet quiet ventilation via its top grade brushless motor. An energy-saving ventilation solution for a healthy and comfortable environment!

Show more

Benefits

Improves home health and comfort by removing moisture, harmful mold, mildew, and radon gases
Extends life span of roofing materials
Reduces energy costs
Reduces strain on air-conditioners
Balances indoor temperature
Prevents ice-damming in winter (without thermal auto shut-off)

Features

R

100% Solar Powered

R

Easy Installation (Patented Retrofit Design One-Piece Fan and Shroud Assembly)

R

Tested for Safety, Energy Efficiency, Air-Pressure Compliance, and Hurricane Wind Endurance

R

Flexible and Adjustable Separate Solar Panel to Capture and Optimize the Sun’s Rays

R

Modular Fan Capacity to Enable Right-Sizing and Optimal Positioning

R

20 Year Limited Warranty

R

Includes a SNOWVENTCO Smart Vent

Download Spec Sheet

Easy Installation Instructions

Solar Attic Fan Sizing Guide

Reviews

"We are really glad we got these fans installed. I have seen a big difference on the top floor when it's hot out. My husband has been on the roof a couple of times and the installation is solid. I really recommend this company and the fans."

- Ri Ri

Source: Google Review

"Works great keeps the attic cooler and our hydro bills haven't increased since putting this on the roof. Highly recommend"

- Doreen Lund

Source: Google Review

"Device works quite well. A SLIGHT hum noted when device activates. Still doing good job 5 yr since installation. Noticeable improvement in temperature in my home on second floor. Installers did great job, done quickly and professionally. I have a 4000 sq ft home with 2 roof devices"

- Roger Bunn

Source: Google Review

"I retrofitted (2) 19 Watt-MOD units into my existing roof vents in 2014. This product did everything it was supposed to and more."

- John Lambert

Source: Google Review

SNOWVENTCO

Smart Filter Attic Vent with Micropore Stainless Steel Filter Technology

SNOWVENTCO Upper Roof Exhaust Vent, 50 sq. in.





View Reviews

From

^$32^{22 USD}

Designed and manufactured in Canada, SNOWVENTCO’s patented, CSA-approved, polypropylene and stainless-steel design enables heat and moisture to escape your attic… while providing a hail resistant, clog-free, 99%+ impenetrable barrier (SNOWVENTCO’s unique micropore stainless steel Smart Filter), which has thousands of 120-micron holes keep out all unwanted elements. The Smart Filter is engineered not to clog thanks to the porcelain-like smoothness of the steel screen and the outflow of warm air from the attic, which continuously cleans the filter.

Show more

Benefits

Improves home health and comfort by removing moisture, harmful mold, mildew, and radon gases
Extends life span of roofing materials
Reduces energy costs
Reduces strain on air-conditioners
Balances indoor temperature
Prevents ice-damming in winter (without thermal auto shut-off)

SNOWENTCO Features

R

Featuring micropore stainless steel filter technology: hail resistant, over 99% impenetrable barrier to snow, rain, insects and vermin

R

Patented pleated filter design provides 80 sq in of filter surface for a 50 sq in NFA vent

R

Exceeds CSA airflow requirements

R

Intake air is filtered on an ongoing basis

R

CSA Approved

Specifications

iSolar 19W-MOD-SNV

R

Power

19W solar panel

R

Solar Panel

Polycrystalline, adjustable / detachable size: 38.1×44.6×2.5 cm (15×17.5×1 in.)

R

Fan Blades

(5) Composite plastic fan blades. 7.6 cm (3 in.)

R

Cable

66 cm (26 in.) length cable to connect solar panel and fan. Longer cable sizes available.

R

Fan Housing

One-piece fan and plenum for easy retrofit under existing vent covers.

R

Fan Dimensions

17.2×15.2×5 cm (6.7×6.x2 in.)

R

Air Movement

250 to 400 CFM*

R

Packaging

50.8×50.8×20.3 cm (20x20x8 in.)

R

Weight

5.89 kg. (13 lbs.)
including SNOWVENTCO

R

Applications

Roof/Attic, Sheds, Garages & Outbuildings

R

Thermal Auto Shut-off Switch

Optional Shut-off Switch – Set to 20C/68F

R

Motor

Brushless DC

R

Motor Voltage

0.8A~24V

R

Motor Power

≤ 20W

R

Motor Size

7.6 cm (3 in.) diameter

R

Motor Speed

3500 RPM

R

Motor Quietness

< 65 dB

R

Motor Material

Aluminum & plastic, high quality ball bearings

R

Motor Intrusion Protection

IP56 (Dust Resistant)

Specifications

SNOWVENTCO Smart Filter Attic Vent

R

Vent Size

21.59×19.67 cm (8.5×7.75 in.)

R

Vent Hole Size

18.42×18.42 cm (7.25×7.25 in.)

R

Filter Size

pleated 50 sq in filter gives 80 sq in of filter surface area

*Due to lack of industry standards, CFM is often quoted as the maximum peak output of a bare fan in laboratory conditions. iSolar CFM is representative of operating in typical attic conditions ranging in output from 250 CFM to a maximum of 400 CFM, depending on intensity of the sunlight and duration of direct sunlight on the panel.

Our Product has Been Tested for Safety, Air-Pressure Compliance, Hurricane Wind Endurance and Energy Efficiency by the Following Independent Organizations:

Sustainability

By design, the 19W-MOD iSolar Attic Fan focuses on the Environment and Sustainability

The 19W-MOD iSolar Attic Fan is manufactured with cast aluminum, aluminum and recycled plastic, all of which are recyclable at end of life which is estimated to be 20 years or more.
Our packaging is produced with recycled paper.
Our product is 100% solar powered and therefore uses no electricity.
iSolar Attic Fan extends the life of roofing materials (shingles and wooden trusses) by keeping the attic related surfaces dry and free from mold and mildew.
The iSolar Attic Fan extends the life of air-conditioners as they will require less usage due to lower temperatures in the home. Lower temperatures will trigger the AC ON switch less frequently.
The iSolar Attic Fan was developed to be as simple and environmentally slimmed down as possible to avoid inclusion of unnecessary and bulky additional materials such as batteries, extra solar panels, timers, controls and regulator components.

“iSolar is the ideal partner for us in the area of attic management.”

Bryan Baeumler, host of HGTV’s Bryan Inc., Leave it to Bryan, Bryan Island
www.bryanbaeumler.com

How can you cool your home without spending a cent on electricity? With Solar Powered Attic Fans!

Easy installation – with no wiring
Cools living space and reduces humidity
Helps increase the life of the roof and air-conditioner system
Turns hot, humid attic air into cash by cutting electricity use
Helps a homeowner ‘’go solar’’ for less than $500*
20 year limited warranty

*Remember to inquire about government and/or utility incentives!

Tax Credits and Energy Efficiency Programs

CANADA

In March 2018, the Ontario AffordAbility Fund Trust (AFT) included the Mechanical Attic Fan category to its list of Level 2 and Level 3 Measures with a special emphasis on solar powered attic fans which would include the model manufactured by International Solar Solutions (iSolar).

Call your local electric utility company and ask about your eligibility to receive our iSOLAR ATTIC FANS as part of the Ontario Government’s AffordAbility Fund Program.

Learn More (CAN)

UNITED STATES OF AMERICA

The iSolar Attic Fan is ideal for Government and Utility supported renewable energy and conservation programs and has so far been approved for a number of TRMs in different utility markets. The iSolar Attic Fan warrants incentives, tax credits and other forms of program benefits.

Residential solar products have been eligible for a US Federal Tax Credit for many years. In 2020 the credit is 26% of the total installed cost of a residential solar product!

After installing your solar solution you fill out IRS form 595 and include it with your annual tax filing. See Sample Form 595.

Only products backed by this publicized statement (on the manufacturer’s website) are eligible for the Tax Credit. Manufacturer’s Certification Statement

Learn More About Solar in Various States (USA)

View the Database of State Incentives for Renewables & Efficiency (USA)

Solar-Attic-Ventilation-Fans-iSolar-Solutions

Contractors and Home Builders

The Solar Attic Fan gives you the opportunity to offer a profitable add-on product that enables homeowners to ‘go solar’ affordably.
If you’re still putting passive vent covers on roofs to vent the air, but nothing to actually draw the hot air out of the attic, the solar powered attic fan will be a game-changer for you.
The Solar Attic Fan can change the way homeowners think about their home. Imagine being able to use the word Solar in your business offerings.
It’s an easy and inexpensive way to offer additional value to your customers. Low cost, high return.
Volume discounts available. Please fill out the form below for contractor pricing.